You will need a pull-up resistor of about 5 KOhm between the 1-Wire data line and your 5V power. If you are using the DS18B20, ground pins 1 and 3. The centre pin is the data line '1-wire'. This ...

A programmable temperature and process controller for use by the maker community has been designed to be Arduino-compatible. Called the SmartPID it can be programmed on a PC via the USB port using the ...

//FUTURE = 2, //From: Pi to Arduino. Future Temperatures [2,TimeIndex,MS_Temp,LS_Temp] //ex: [2,15,29,88] - Set Future entry of 29.88 for 07:30 //REPORT = 3, //From ...

In this project, we are going to build something very simple project, a temperature controlled relay that is used to turn on a dc fan. You can actually change the DC Fan to other electrical devices ...

[Edward], creator of the Cave Pearl project, an underwater data logger, needed a way to measure temperature with a microcontroller. Normally, this problem is most easily solved by throwing a ...